-
Overview of the Pavement Lift
Pavement lifts allow pedestrian access when scaffolding obstructs a public area along the length of an elevation. In terms of SMART Estimator, as soon as the pavement lift has been applied, the ground lift will be applied with Safety Lamps and Foam Tube Safety Standards and the lift height will be set to a height of 2.7 metres.
In addition, Ledger Bracing will be removed so that pedestrians will have access to and egress from the scaffold’s length. Finally, plan bracing will also be added to the first lift of the scaffold.
-
Where can I find the Pavement Lift tool?
You can find the Pavement Lift Tool in Model IT by navigating to the Options View on the Toolbar at the far right, from here click on it to select the Pavement Lift.
-
Applying the Pavement Lift to the Scaffold
After selecting the Pavement Lift Tool, click on the scaffold elevation to apply it to the whole scaffold. This will fit your scaffold with a Pavement Lift, which can be adjusted according to the project’s needs.
Applying the Pavement Lift to an Elevation
By holding down the Ctrl key before using the Pavement Lift tool, the highlight will be limited to one elevation. In this case, hold down the Ctrl key while applying the Pavement Lift as before to apply it to a singular elevation.
SMART Estimator
What’s new?
Getting Started
Setup and Configuration
-
Enterprise Server
User settings
-
User software settings
User Address Settings and yard
Scaffold Banner and Sheeting logo
Adding Watermarks
-
Setting up your Rates
Editing shared pricing rates
Creating a rate setting template project
Importing and Exporting shared Rates
Creating an Estimate
Importing Drawings and Models
Scheduling Scaffolds
Creating 3D Scaffolds
-
3D Model Controls
Adding Independent scaffolds
Adding Circular Tank scaffolds
Adding Birdcage & Lift shaft scaffolds
Adding Tied or Freestanding towers
Adding Stair towers, Ladders towers & Buttresses
Adding Loading bays
Adding Chimney scaffolds
Adding Temporary Roof
Adding Edge protection
Adding Pavement Gantry’s
System Scaffolds
Using the Scaffold Library
Editing Scaffolds
Scaffold Add-ons & Options
-
Adding Gin wheels, Rubbish Chutes, Safety standards, Double standards and Lamps
Adding and Editing bridges/beam work
Adding Beams around Corners
Adding Cladding
Adding Cantilever protection fans
Adding Pavement Lifts
Adding Recesses and Infills
Building and Ground colour
Visual options (Tube, Ladder, System details and Grips)
Add a Pedestrian or Scaffolder
Copying pictures of the model
Material lists and Drawings
Quotations
Troubleshooting