Download SMART Compliance 2025
Download Smart Compliance 2025
WHAT’S NEW IN SMART COMPLIANCE 2025.0
SMART Compliance is the software used during the development of NASC TG20:21. It has been significantly updated for version 2025 with these enhancements:
-
A new module has been provided for internal birdcage scaffolding:
-
The maximum leg load and, if applicable, the maximum tie duty and tie pattern are calculated in accordance with BS EN 12811-1 and TG20:21.
-
A check to TG20:21 is performed, and the required compliance criteria are reported. If the check fails, guidance is provided to become compliant.
-
The birdcage may be tied, securely butted or freestanding, with the option to be tied or butted in one direction and freestanding in the other.
-
Options are provided for boarded lifts, unboarded lifts with ladder landings, and perimeter boarding.
-
The birdcage may be of load class 1 – 3 in accordance with TG20:21.
-
Options are provided for TG20 compliant high-tensile galvanised steel tubes or Type 4 galvanised steel tubes.
-
-
The guidance for rakers in the tie duty report for independent scaffolding has been updated to permit rakers to be used in place of ties for unclad scaffolding up to 6.0 m in height in accordance with section 6.23 of the TG20:21 Operational Guide.
Read the full release notes for further information about these updates.
